The ADK automatic drain valve is compatible with AK and 3K series steam generators.  The ADK valve is designed to drain and flush the generator tank after the end of each steam bath to reduce sediment build-up inside the tank, prolong heating element life and provide fresh water for each bath.  The ADK drain and flush cycle waits approximately 17 minutes to allow water in the tank to cool, then calls for cold water input to further reduce water temperature before the motorized drain valve opens to drain the tank.  Water continues to flow through the system to flush out sediment and debris, and then the tank remains empty until the next steam bath.

The injector eliminates the need to drop aromatherapy oils onto the steam head by introducing oils directly into the steam line. The K200i Control allows the bather to control the frequency and amount of aromatherapy oil pumped into the room.

This unit is required when using one or more Amerec accessories with the K200i Freedom Control Unit.

This acrylic steam diffuser is designed for use with the Amerec Cool Touch steam head.  This opaque diffuser prevents hot steam from moving across the shower floor and causing bather discomfort.  It also reduces staining of floor and wall material that might occur when water delivered to the steam generator contains high mineral content.

The ASX200 filter system is a two housing water treatment system with drop-in 20″ cartridges that reduces sediment down to 1/2 micron and reduces corrosive chlorine for 30,000 gallons. The system includes ScaleX2, a chemical-free scale prevention technology that utilizes Template Induced Crystalization to effectively protect equipment against the problems associated with hard water. A built-in pressure gauge allows visual monitoring of operating pressure. An inlet shut-off and depressurization valve make changing the cartridges quick and simple. The ASX200-RFK filter replacement kit is available from Amerec.